power adaptor

Specification
Input	Voltage range		90~264Vac, 135~370Vdc
	Frequency range		40~63Hz
	AC current		0.9A/100Vac
	Inrush current (max.)		30A/230Vac
	Leakage current(max.)		0.25mA/240Vac
Protection	Over load		>110% rate output voltage power for 5.0V~36V
			Protection type:hiccup mode,recovers automatically after fault condition is removed
	Short circuit		Power shutdown
			Auto recovery after fault condition is removed
Environment	Working Temp.		0~40℃
	Working Humidity		20%~90% RH non-condensing
	Storage Temp. Humidity		-20℃~85℃, 10%~95% RH
	Temp. Coefficient		±0.03%/℃ (0~50℃)
	Vibration		10~500Hz, 2G 10min/ cycle,period for 60 min,each along X,Y,Z axes
Safety & EMC	Safety Standard		UL60950, EN60950,EN61558
	Withstand voltage		I/P-O/P:3KVac, 1 minute
	Isolation resistance		I/P-O/P: 100M ohms/500Vdc/25℃/70%RH
	EMI condition & radiation		Compliance to EN55022 class B, FCC part15 class B
	Harmonic current		Compliance to EN6100-3-2,3
Others	MTBF		100Khrs min, MIL-HDBK-217F(25℃)
	Dimension		105mm45mm27.8mm
	Packing		100pcs/Carton
Connector	AC Plug		Interchangeable plug
	Cable		18# or 20#, other type available by client's requested
Note	1.Al l parameters are specified at 230Vac input, rated load,25℃ 70% RH ambient;
	2.DC voltage: the output voltage set at point measure by plug terminal & 100% load;
	3.Ripple & Niose are measured at 20Mhz bandwidth by using a 30cm twisted-pair wire terminated with a 0.1uf & 47uf parallel capacitor
	4.Tolerance: includes set up tolerance, line regulation, load regulation,
	5.Line regulation is measured from low line to high line at rated load,
	6.Load regulation is measured from 0%~100% at rated load
	7.Efficency is measured at 100Vac,
	8.The power supply is considered a component which will be installed into a final equipment.The final equipment must be
	re-confirmed that is still meets EMC derectives
Output
Ref No.	DC Voltage	Current	Ripple & Noise	Line regulation	Load regulation	Voltage tolerance	Efficiency
PFD0505000	5.0V	5.0A	50mV	±1%	±5%	±5%	>72%
PFD0754000	7.5V	4.0A	75mV	±1%	±5%	±5%	>72%
PFD0904000	9.0V	4.0A	90mV	±1%	±5%	±5%	>75%
PFD1203000	12.0V	3.0A	120mV	±1%	±5%	±5%	>80%
PFD1502400	15.0V	2.4A	150mV	±1%	±5%	±5%	>80%
PFD1802000	18.0V	2.0A	180mV	±1%	±5%	±5%	>80%
PFD2201600	22.0V	1.6A	220mV	±1%	±5%	±5%	>80%
PFD2401500	24.0V	1.5A	240mV	±1%	±5%	±5%	>80%
PFD3201125	32.0V	1.125A	320mV	±1%	±5%	±5%	>80%
PFD3601000	36.0V	1.0A	360mV	±1%	±5%	±5%	>80%


	Tel: +86-0769-82980700　　　Fax： +86-0769-81890449 Panfore Electronics Co.,ltd 　粤ICP备09096133号 All rights reserved@ Copyright 2009 [Website management]